Loose Boxes, Tack Rooms and Field Shelters

STANDARD FIELD SHELTERS

TIMBERS

Sustainable Redwood.

WALL PANELS

Framework – 75mm x 50mm (3” x 2”) PAR@ 6000mm (2’) centres.

Bottom rail – pressure treated and secured to the base with expanding bolts.

CLADDING

150mm x 19mm (6” x ¾”) interlocking and rebated shiplap boarding.

ROOF

Pitched roof clad with Onduline sheeting (in a choice of 4 colours) laid on 6mm wbp plywood over 125mm x 50mm (5” x 2”) PAR purlins.

COVER STRIPS

Cover strips fitted to all panel joints.

TREATMENT

All timbers treated by total immersion in preservative oil.

FOUNDATION TIMBERS (optional extra)

1000mm x 75mm (4’ x 3”) pressure treated foundation timbers and securing rods.

field shelter

STANDARD LOOSE BOX AND TACK ROOM

TIMBERS

Sustainable Redwood.

WALL PANELS

Framework – 75mm x 50mm (3” x 2”) PAR @ 6000mm (2’) centres.

Bottom rail - pressure treated and secured to the base with expanding bolts.

ROOF

Pitched roof clad with Onduline sheeting (in a choice of 4 colours) laid on 6mm wbp plywood over 125mm x 50mm (5” x 2”) PAR purlins.

CANOPY

1200mm (4’) lined canopy to front.

RAINWATER GOODS

Gutter and downpipe fitted to canopy.

DOORS AND FRAMES

Laminated plywood stable doors. Bottom door fully lined with galvanised sheet steel. Top sides of door frame protected by galvanised sheet steel. Anti-horse bolt and kick over latch fitted to the bottom door. Heavy duty hooks and bands. All doors fittings are galvanised.

KICKING BOARDS

150mm x 25mm (6” x 1”) PAR timber kicking boards fitted to a height of 1200mm (4’) with quartering to prevent casting.

WINDOWS

Opening, glazed window, protected internally by 9mm (3/8”) galvanised iron bar grille.

VENTILATION

Louvered vents fitted to gable ends and a 600mm x 300mm (2’ x 1’) adjustable slide shutter fitted to rear wall giving improved through ventilation.

COVER STRIPS

Cover strips fitted to all panel joints.

TREATMENT

All timbers treated by total immersion in preservative oil.

STABLE FITTINGS

One tie ring, one salt lick holder and one stud card holder.

TACK ROOM FITTINGS

Window grille, one saddle cleaning rack, one tack cleaning rack, one bridle holder and a set of three yard tool holders.

Standard Stable

Rural Workshops or Garden Rooms

STANDARD AND RURAL WORKSHOP

TIMBERS – Sustainable Redwood.

WALL PANELS Framework – 75mm x 50mm (3” x 2”) PAR@ 6000mm (2’) centres.

Bottom rail – pressure treated and secured to the base with expanding bolts.

CLADDING

150mm x 19mm (6” x ¾”) interlocking and rebated shiplap boarding.

ROOF

Pitched roof clad with Onduline sheeting (in a choice of 4 colours) laid on 6mm wbp plywood over 125mm x 50mm (5” x 2”) PAR purlins.

DOORS

1 no. pair of 1500mm x 1981mm (5’ x 6’6”) framed, ledged and braced doors hung on heavy duty galvanised ‘T’ hinges and secured with a mortise lock.

WINDOWS

1 no. 3 pane side hung casement window.

COVER STRIPS

Cover strips fitted to all panel joints.

RAINWATER GOODS

Gutter and downpipe fitted.

TREATMENT

All timbers treated by total immersion in preservative oil.

Standard Workshop

Garages

STANDARD Garage

TIMBERS – Sustainable Redwood.

WALL PANELS Framework – 75mm x 50mm (3” x 2”) PAR@ 6000mm (2’) centres.

Bottom rail – pressure treated and secured to the base with expanding bolts.

CLADDING

150mm x 19mm (6” x ¾”) interlocking and rebated shiplap boarding.

ROOF

Pitched roof clad with Onduline sheeting (in a choice of 4 colours) laid on 6mm wbp plywood over 125mm x 50mm (5” x 2”) PAR purlins

DOORS

2134mm x 1981mm (7’ x 6’6”) metal up and over door(s).

WINDOWS

1 no.fixed light.

COVER STRIPS

Cover strips fitted to all panel joints.

RAINWATER GOODS

Gutter and downpipe fitted.

TREATMENT

All timbers treated by total immersion in preservative oil.

Standard Double Garage

Fencing

PALE FENCING

CLOSE BOARD FENCING

PANEL FENCING

POSTS

100mm x 100mm (4” x 4”) @ CENTRES 2.29m (7’ x 6”).

RAILS

75mm x 50mm (3” x ¾”).

FINISH

Planed and treated with red cedar or dark brown preservative.

(Optional Extra) – Pressure preservative treated.

POSTS

100mm x 100mm (4” x 4”) @ CENTRES 2.29m (7’ x 6”).

HORIZONTAL BACKING RAILS

75mm x 50mm (3” x 2”).

GRAVEL BOARD

150mm x 25mm (6’ x 1”)

CAPPING STRIP AND COUNTER RAILS

FINISH

All pressure treated.

FRAME

50mm x 25mm (2” x 1”).

CLADDING

6mm (1/4”).

FINISH

Treated with light brown creosote.

Pale

Close Board

Trellis

Trellis Top Panel

Bridges

Provincial Classic

Rural Classic

County Classic

Colonial Classic

Colonial Curved

County Curved

Colonial Parapet

Preston Doors / Gates

TOP RAIL

Ex 200mm x 65mm (8” x 2½”).

FRAMING

Ex 125mm x 65mm (5” x 2½”).

BRACING

Ex 125mm x 50mm (5” x 2”).

CLADDING

Hardwood – 19mm (3/4”) tongued and grooved ‘V’ boarding.

Redwood – Ex 19mm (3/4”) tongued and grooved ‘V’ boarding.

FINISH

Hardwood – planed, sanded and treated with light brown preservative.

Softwood – planed, sanded and immersed in dark brown preservative.

PD 1

PD 2

PD 3

PD 4

SPD 1

SPD 2

SPD 3

SPD 4

Gates – Pattern / Wicket / Curved Heel / Framed / Field

PATTERN GATES

FRAME

ex 75mm x 65mm (3” x 2½”).

TOP SLATS AND BRACES

Ex 50mm x 32mm (3” x 1¼”)

LOWER SLATS

Ex 65mm x 18mm (2¼ “ x ¾”)

OR CLADDING

19mm (3/4”) tongued and grooved ‘V’ boarding.

HEIGHT

PG1, PG2, PG3 – 1.07m (3’6”) PG4 – 1.02m (3’4”).

FINISH

Hardwood – planed, sanded and treated with light brown preservative.

Softwood – planed, sanded and immersed in dark brown preservative.

PG 1

PG 2

PG 3

PG 4

WICKET GATES

HEIGHT

WG1, WG2 – 1.78m (5’10”)

LEDGES AND BRACES

Ex 100mm x 32mm (4” x 1¼“)

SLATS

Ex 75mm x 25mm (3” x 1”).

OR CLADDING

19mm (3/4”) tongued and grooved ‘V’ boarding.

HEIGHT

WG3, WG4 – 914mm (3’).

RAILS AND BRACES

Ex 70mm x 50mm (2 ¾” x 2”).

HEAD AND HEEL

Ex 70mm x 70mm (2¾” x 2¾”).

PALES

Ex 70mm x 25mm (2 ¾” x 1”).

FINISH WG3

Hardwood – planed, sanded and treated with light brown preservative.

Softwood – planed, sanded and immersed in dark brown preservative.

FINSIH WG4

Sawn, pressure treated.

WG 1

WG 2 FRONT

WG 2 BACK

WG 3

WG 4

CURVED HEEL GATE

HEEL

125mm x 75mm (5” x 3”).

HEAD

75mm x 75mm (3” x 3”).

TOP AND BOTTOM RAIL

75mm x 75mm (3” x 3”).

BARS AND CROSS-STRUTS.

75mm x 22mm (3” x 7/8”).

FINISH

Hardwood – planed, sanded and treated with light brown preservative.

Softwood – planed, sanded and immersed in dark brown preservative.

PG                   CH          

FIELD GATE

TAPERED HEEL

150mm x 75mm (6” x 3”).

HEAD

75mm x 75mm(3” x 3”).

TOP RAIL

75mm x 75mm(3” x 3”).

BARS

75mm x 22mm(3” x 7/8”).

FINISH

Country Cut. All mortised joints, zinc coated nuts and bolts at rail crossings. Pressure preservative treated.

G 1

G 2

FRAMED GATE

HEEL

125mm x 75mm (5” x 3”).

HEAD

75mm x 75mm (3” x 3”).

TOP AND BOTTOM RAIL

75mm x 75mm (3” x 3”).

BARS AND CROSS-STRUTS.

75mm x 22mm (3” x 7/8”).

FINISH

Hardwood – planed, sanded and treated with light brown preservative.

Softwood – planed, sanded and immersed in dark brown preservative.

FG 1

                  FG 2                             PG

POST AND RAIL FENCING

POSTS

1.82m x 125mm x 75mm (6’ x 5” x 3”) with half back weathered top and pointed end.

RAILS

3.65m x 100mm x 40mm (12’ x 4” x 1½“).

FINISH

All pressure treated Larch or Douglas.

PR 2

PR 3

PR 4